Home > Products > Tube Furnace
Ultrasonic Spray Pyrolysis Furnace with Spray Nozzle and Powder FeederUltrasonic Spray Pyrolysis Furnace with Spray Nozzle and Powder FeederUltrasonic Spray Pyrolysis Furnace with Spray Nozzle and Powder Feeder

Ultrasonic Spray Pyrolysis Furnace with Spray Nozzle and Powder Feeder

    CY-1200X-USPA is a Two Heating Zone Split Vertical Tube Furnace with vacuum sealed 100mm diameter quartz tube. It can introduce gas flow or liquid/ water atomization to the heating furnace, also be used for PVD, CSS or CVD coating.

CY-1200X-USPA is a Two Heating Zone Split Vertical Tube Furnace with vacuum sealed 100mm diameter quartz tube. It can introduce gas flow or liquid/ water atomization to the heating furnace, also be used for PVD, CSS or CVD coating. Two precision temperature controllers provide 30 segments heating and cooling program with +/- 1℃ accuracy independently. The vertical tube furnace is installed in a heavy-duty mobile cart for easy moving.

Technical parameters of Ultrasonic Spray Pyrolysis Furnace:

Furnace Structure

  • Two Heating Zone Split Vertical Tube Furnace for longer and uniform constant temperature zone.

  • The ultrasonic spray nozzle can make liquid/water atomized via gravity and low-pressure compressed air.

  • Volumetric Feeder for feeding solid powder into a furnace to form core/ shell structure

Upgrade

  • If you need a horizontal furnace, we will change to the same specification tube furnace at no cost.

  • You could upgrade from 40KHz to 3 KW and 120 KHz, Ultrasonic Spray Nozzle at extra cost

Power for Furnace

6KW (total) / each zone: 3KW

Voltage

AC 208-240V Single Phase, 50/60 Hz

Max. Temperature

1200℃ (<1 hr) each zone

Continuous Temperature

1100 for each zone

Max. Heating Rate

<= 20/min.

Temperature Accuracy

+/- 1

Tube Size and Materials

  • One 1000mm length quartz tube is included

  • OD: 100 mm, ID. 95 mm

  • Foam ceramic blocks with alumina coating are included, which is hanged on top of flange to protect O-ring damaged by heat radiation

Heating Zone Length

  • 200mm ( bottom )

  • 200mm ( top )

  • 400mm ( total )

Constant Temperature Zone

Constant temperature zone: 300 mm (+/-1) if two heating zones are at the same temperature

Temperature Controller

  • 30 programmable segments for precise control of heating rate, cooling rate and dwell time.

  • Built in PID Auto-Tune function with overheating & broken thermocouple broken protection.

  • Over temperature protection and alarm allows for operation without attendant(s).

  • RS485 Communication Port.

Vacuum Sealing Flange

  • Two stainless steel flanges with vacuum gauge and valves included

  • A hook ring is welded inside the top flange for hanging thermal block or crucible by wire

Gas outlet ( vacuum port ) on top with 1/4" barb connector.

Gas inlet on bottom with 1/4" barb onnector


Vacuum Level

  • 10E-2 Torr by mechanical vacuum pump

  • 10E-5 Torr by molecular pump

  •  Leak rate < 5 mTorr / min.

Heating Element

1300°C Fe-Cr-Al Alloy doped by Mo

Dimensions

550mm(L) x 380mm(W) x 520mm(H) exclude mobile   cart

600mm(L) x 600mm(W) x 1200mm(H) install with   mobile cart

Net Weight

About 80 kg (excluding mobile cart)

Shipping Size

48"(L) x 40"(W) x 72''(H)

Shipping Weight

400 lbs

Warranty

One year limited warranty with lifetime support


Disclaimer: The product introduction content (including product images, product descriptions, technical parameters, etc.) of this site is for reference only. As the update may not be timely, there will be some differences between the content and the actual situation. Please contact our sales staff to confirm. The information provided on this site does not constitute any offer or promise, and the company will periodically improve and modify the website information, without prior notice, please understand.

Contact Us
  • E-mail: cysi@cysi.wang
  • Tel: +86 371 5519 9322
  • Fax: +86 371 8603 6875
  • Add: No. 820, 8th Floor, 1st Unit, 9th Block, Cuizhu Street, High-Tech Zone, Zhengzhou, Henan, China




Follow Us

Copyright © Zhengzhou CY Scientific Instrument Co., Ltd. All Rights Reserved    Update cookies preferences

| Sitemap |       Technical Support: