Home > Products > lab coating equipment
Split Type Max Dual Sliding Rtp Tube Furnace for Molybdenum Disulfide (MOS2) Research

Split Type Max Dual Sliding Rtp Tube Furnace for Molybdenum Disulfide (MOS2) Research

    This set of equipment is split vacuum tube furnace and the front end is equipped with pre - heater heated to 400 ºC, the auxiliary sulfur powder evaporation, the rear end of the dual-zone curing oven, precise temperature control, easy to operate. .The left side is equipped with a flange support,preheater and sulphur furnace can be used separately.Right side is equipped with atmosphere micro-adjustment device,which can accurately reflect the gas pressure in the chamber.The regulating valve with a scale,used for low pressure CVD, is very practical and good repeatability.

Basic Info


  • Model NO.: CY-1200-80IIIC

  • Structure: Desktop

  • Certification: CE, TUV

  • Type: Heating Type

  • Heating Rate: 20c/Min.

  • Gas System: Mass Flow Meter

  • Trademark: CY

  • Specification: OD. 80x1400mm

  • HS Code: 85141090

  • Customized: Customized

  • Material: Steel

  • Application: Lab

  • Heating Zone: Three

  • Vacuum Sealing Flange: Stainless Steel

  • Warranty: One Year

  • Transport Package: Wooden Box

  • Origin: Zhengzhou, China



Product Description


split type Max Dual Sliding RTP Tube Furnace for molybdenum disulfide (MoS2) research
This set of equipment is split vacuum tube furnace and the front end is equipped with pre - heater heated to 400 ºC, the auxiliary sulfur powder evaporation, the rear end of the dual-zone curing oven, precise temperature control, easy to operate. .The left side is equipped with a flange support,preheater and sulphur furnace can be used separately.Right side is equipped with atmosphere micro-adjustment device,which can accurately reflect the gas pressure in the chamber.The regulating valve with a scale,used for low pressure CVD, is very practical and good repeatability.

 Technical parameters:

Furnace 
Construction
Double layer steel casing with air cooling 
High purity alumina fiber insulation for max. energy saving 
Splitable cover for easy tube replacement 
Power 
Consumption
5 KW
Input Voltage AC 208-240V Single Phase, 50 or 60 Hz 
Maximum 
Temperature 
1200℃ 
Continuous 
Temperature 
1100℃
Maximum 
Heating Rate 
<= 20℃ /min 
Heating Zone 
Length
Three zones: (880mm, 35" in total)
Zone 1: 220mm (8.6" )
Zone 2: 440mm (17.3")
Zone 3: 220 mm (8.6")
Constant 
Temperature 
Zone
If three zones are set at the same temperature, constant temperature zone 
is 25" 
(625 mm) long with a temperature discrepancy of +/- 1℃.
If using only one zone (center zone), constant temperature zone is 4.3" 
(110 mm) 
long with a temperature discrepancy of +/- 1℃.
Temperature 
Accuracy
+/- 1℃
Heating 
Elements
Fe-Cr-Al Alloy doped by Mo
Temperature 
Controller
Three precision temperature controllers to control three zones separately.
PID automatic control with 30 programmable segments for precise control 
of heating rate, cooling rate and dwell time.
Built in overheating & broken thermocouple protection.
Over temperature protection and alarm allows for operation without 
attendant(s).
+/- 1 C temperature accuracy.
RS485 Communications Port..
Quartz Tube& 
Sealing Flanges
80 mm O.D x 72 mm ID. x 1400 mm fused quartz tube included. 
Vacuum flanges with valves and pressure gauge are included. 
Thermal block must be placed inside tube as the drawing below 
Vacuum Sealing 
Flanges
Two stainless steel flanges with both vacuum gauge and valves included.
Min. vacuum pressure achieved by mechanical pump is 5.5 m-torr. 
( 5.5x10^-3 torr). 
The pressure can reach 10^-5 torr by using mechanical + molecular pump.
Leaking rate is < 5 m-torr / min. and stable vacuum pressure after 24 hours 
is < 2 torr.
Oxygen MonitoringAn Oxygen Sensor can be used to monitor the oxygen level of gas(es) used 
in CVD systems
 for preventing or reducing oxidation. Please click the picture below to 
learn more:
Vacuum Pump120 L/m Rotary Vane Vacuum Pump is included with max. vacuum pressure
 of 10^-2torr. Stainless steel hose tube is included for connecting to tube 
furnace.
Gas Flow Meter 
and
 Pressure Meter
 
Three gas flow-meters (4% accuracy FS) are installed inside the mobile case 
to 
enable monitoring of gas flowing rates 
Compact direct read flow meter, 10-100 cc/min.
Compact direct read flow meter, 16-160 cc/min.
Compact direct read flow meter, 25-250 cc/min.
ValvesFour stainless steel valves are installed in the side panel of mobile cart to 
control mixing of three inlet gases separately
DimensionsFurnace: 1100 X 450 x 670 mm
Bottom Mobile case: 600x600x597 mm


Contact Us
  • E-mail: cysi@cysi.wang
  • Tel: +86 371 5519 9322
  • Fax: +86 371 8603 6875
  • Add: No. 820, 8th Floor, 1st Unit, 9th Block, Cuizhu Street, High-Tech Zone, Zhengzhou, Henan, China




Follow Us

Copyright © Zhengzhou CY Scientific Instrument Co., Ltd. All Rights Reserved    Update cookies preferences

| Sitemap |       Technical Support: