This product is mainly used for battery overcharge and overdischarge, charge and discharge, the battery in the explosion-proof box. In order to protect the operator and instruments, the machine test box can be customized according to the test requirements
This product is mainly used for battery overcharge and overdischarge, charge and discharge, the battery in the explosion-proof box. In order to protect the operator and instruments, the machine test box can be customized according to the test requirements
Technical parameter:
Internal box size | 500x500x500mm (width x deep x high) |
contour size of the unit | 680x750x1375mm (W x depth x H) |
Internal box material | SUS201 Stainless steel plate, 1.2mm thick and affixed with iron fluorine dragon |
External box material | 1.5mm thick cold-rolled steel sheet baking paint treatment |
Observation window | 250x250mm two layers of tempered glass with stainless steel mesh |
Exhaust port | Is 100mm in diameter, located at the back side of the box |
Pressure discharge mouth | The opening size is 200x200mm, located at the back of the box. When the sample explodes, the pressure relief port opens to remove the pressure |
Box door | Single door left open, the side of the door is equipped with an explosion-proof chain |
Instrument connection | There is a test hole with a diameter of 50mm on the left side of the equipment, which is easy to put into the acquisition line of temperature, voltage and current |
Equipment moving | There are four universal direction casters at the bottom of the device, which can move freely |
Illuminator | Easy to observe the state of the tested sample |
Test box | Two |
Weight of equipment | 65Kg |
Source | AC220V |
Power | 200W |
Copyright © Zhengzhou CY Scientific Instrument Co., Ltd. All Rights Reserved Update cookies preferences
| Sitemap | Technical Support: