Home > Products > CVD System
1200℃ two heating zone high vacuum CVD system with 3-channel float flow meter to supply gas CY-O1200-50IIT-3F-HV

1200℃ two heating zone high vacuum CVD system with 3-channel float flow meter to supply gas CY-O1200-50IIT-3F-HV

    1200℃ two heating zone high vacuum CVD system is equipped with a three-channel float flowmeter, which can accurately prepare the mixed gas required for the experiment. Another pressure gauge is installed on the front of the float flowmeter to monitor the gas pressure and the mixing tank pressure.

1200℃ two heating zone high vacuum CVD system consists of a two-heating zone tube furnace, a three-channel float flow meter and a high vacuum molecular pump set. The two heating zones of the tube furnace are independently temperature controlled by the precision temperature control instrument. By adjusting the temperature of each temperature zone, the tube furnace can form two temperature gradients in the heating zone or form a long constant temperature zone. Each zone can be edited with 30 sections program of temperature rise and fall, with overheating and short circuit protection. The flanges on both sides of the furnace tube are equipped with a digital vacuum gauge and a mechanical pressure gauge, which can be used to control the atmosphere in the furnace tube. At the same time, the tube furnace is operated by high-definition true color touch screen, which is easy to use. Even non-professionals can master the use of the instrument after simple training, which can greatly improve your experiment efficiency.

The system is also equipped with a precision molecular pump set, which can achieve a vacuum of 1.0E-3pa level, which can provide users with a purer and more stringent experimental environment than ordinary mechanical pumps.

1200℃ two heating zone high vacuum CVD system applications:

It is suitable for high-temperature sintering, metal annealing, quality inspection, etc. in universities, research institutes, industrial and mining enterprises, especially for CVD experiments that require a variety of gas mixing atmospheres.

1200℃ two heating zone high vacuum CVD system technical parameters:

Vacuum tube furnace

Model

CY-O1200-50IIT

Tube material

High purity quartz

Tube diameter

50mm (Optional 60mm, 80mm, 100mm)

Tube length

1000mm

Furnace chamber length

440mm

Heating zone length

200mm+200mm

Operating temperature

0~1100℃

Temperature control   accuracy

±1

Temperature control mode

30 or 50 segment program temperature control

Display mode

LCD

Sealing method

304 stainless steel vacuum flange

Flange interface

1/4" ferrule connector, KF16/25/40 joint

Vacuum

4.4E-3Pa

Power supply

AC:220V 50/60Hz

Gas supply system

Model

CY-3F

Gas channel

3-channel

Measuring unit

Gas float flow meter

Measuring range

A channel: 0100ml H2 gas

Remarks: If you need   other ranges or gas types, you need to specify when ordering. According to the customer's specific requirements, the flow meter of the corresponding gas type and range can be selected.

B channel: 16160ml N2 gas

C channel: 25250ml Ar gas

measurement accuracy

±2.0%

Pipe pressure   resistance

3MPa

Working pressure  difference

50300KPa

Connecting pipe

304 stainless steel

Gas channel

304 stainless steel needle valve

Interface specification

1/4" cutting sleeve joint for gas inlet and outlet

Exhaust system

Model

CY-GZK103-B

Molecular pump

CY-600

Backing pump

Rotary vane pump

Pumping rate

Molecular pump: 600L/S

Comprehensive gas   pumping performance: 30 minutes vacuum can reach: 1.0E-3Pa

Rotary vane pump: 1.1L/S

Pumping interface

KF40

Exhaust interface

KF16

Vacuum measurement

Compound vacuum gauge: Resistance gauge + ionization gauge

Ultimate vacuum

1.0E-5Pa

Power supply

AC:220V 50/60Hz

Disclaimer: The product introduction content (including product images, product descriptions, technical parameters, etc.) of this site is for reference only. As the update may not be timely, there will be some differences between the content and the actual situation. Please contact our sales staff to confirm. The information provided on this site does not constitute any offer or promise, and the company will improve and modify any information on the website from time to time without prior notice.

Contact Us
  • E-mail: cysi@cysi.wang
  • Tel: +86 371 5519 9322
  • Fax: +86 371 8603 6875
  • Add: No. 820, 8th Floor, 1st Unit, 9th Block, Cuizhu Street, High-Tech Zone, Zhengzhou, Henan, China




Follow Us

Copyright © Zhengzhou CY Scientific Instrument Co., Ltd. All Rights Reserved    Update cookies preferences

| Sitemap |       Technical Support: