7KW Dual Station Bench Top Induction Heater with Timer Control

Working Voltage

208-240V AC, 50/60 Hz, Single Phase

Max. Input Current

• 34 Amp  (Min. 40A breaker required)

• Power cable included (It is suggested to use twist-lock plug with 10AWG power cable)

Output Frequency

30-80 kHz

Heating Current

200-600 Amp

Max. Input Power

7 KW

Duty Cycle

80%

Max. Distance Between Heater and Controller

2m

Max. Sample Weight

1 kg

Option Control Station

• Automatic timer control or  Manual control selectable

• Manual Control: by Foot Pedal

• Automatic Heating Time: 1-99 Seconds

• Automatic Dwell Time: 1-99 Seconds

• Automatic Cooling Time: 1-99 Seconds

• One Port is built in to connect to the temperature controller and thermal couple, which can control temperature automatically via the optional control unit.  

Air Cooling

Rear Fan

Water Cooling

• Flow rate: 2~5 L/Min

• Pressure: 0.2 MPa (29 Psi)

• Protection: Over-pressure and over temperature switch

• Tap water is acceptable, but using Recirculating Water Chiller is highly recommended.

Induction Coil & Accessories

Two coils with the following dimensions are included:

Coil #1: 76.8mm(OD) x 66.0mm(ID) x 40mm(H)

Coil #2: 82.5mm(OD) x 65.5mm(ID) x 73.5mm(H)

Foot Pedal with Cable  and water connector are included

Display

Digital display shows output power and current

Product Dimensions

• Control Station: 18" x 8" x 17"

• Heating Station: 12" x 8" x 13"

Warranty

One Year limited warranty with lifetime support

Net Weight

25 kg (55 lbs)