Home > Products > Melting furnace
25KW Induction Heating System with Temperature-Controller up to 1700℃25KW Induction Heating System with Temperature-Controller up to 1700℃25KW Induction Heating System with Temperature-Controller up to 1700℃

25KW Induction Heating System with Temperature-Controller up to 1700℃

    It is a larger temperature-controlled induction heating/melting system with complete accessories, which includes a 25KW Induction Heater, 11" O.D Quartz Tube with Hinged type Flanges & Valves, Graphite Crucible & Refractory Assembly, 58L/m Recirculating Water Chiller, Vacuum Pump, and Mobile Cart.

CY-11KTC is a larger temperature-controlled induction heating/melting system with complete accessories, which includes a 25KW Induction Heater, 11" O.D Quartz Tube with Hinged type Flanges & Valves, Graphite Crucible & Refractory Assembly, 58L/m Recirculating Water Chiller, Vacuum Pump, and Mobile Cart. It is an ideal tool for melting and sintering new metallic alloys with melting point < 1700℃ (under protective gas environment).

Technical parameters of 25KW Induction Heating System:

Induction Heater

  • Working Voltage: 220V AC, 50/ 60Hz, Three Phases (380VAC, 3phase available upon request)

  • Working Current: 10~86 Amps (100A breaker required)

  • Max. Input Power: 25 KW 

  • Output Frequency: 30 - 80 kHz 

  • Duty Cycle: 100%

  • Induction Coil: 150mm(OD) x 140mm(ID) x 65mm(H) 

  • Air Cooling: Rear Fan

  • Protection: Automatic water pressure, over-temperature, and overpower protection

  • Refractory Assembling: Complete refractory assembling made of alumina, including bottom crucible support, crucible holder, and cover

Temp. Controller & Thermocouple

  • Precision digital temperature controller with Automatic PID tuning

  • 30 segments programmable for controlling heating and cooling rate as well as dwell time.

  • Overheating & thermocouple failure protection.

  • +/- 3 temperature accuracy. 

  • Thermocouple: C type ( 1/4"x10"L )

  • Continuous Working Temp. Range: 1000~1700

  • Max. Working Temperature: 1800℃ (for less than an hour)

  • Optional: Eurothermo Controller with +/- 0.5 accuracy at the extra cost

Graphite Crucible & Refractory liners

  • High Purity Graphite Crucible: 6" O.D x 5" ID x        6"H, is included for induction heating.

  • Three-layer special design refractory liner can withstand temperature up to 1800.

  • Note: Graphite crucible is consumable, please click order spare at CYKY

Sealing Flanges & Quartz Chamber

  • Two-end Open Quartz Tube is included with dimensions of  11"OD x 10.6"IDx 20” H

  • Top Flange: Stainless steel hinged type flange with 1/4'' thermocouple feedthrough, needle valve, and the barb fitting.

  • Bottom Flange: Stainless steel flange with a needle valve and KF-25 vacuum port.

  • KF25 right angle valve& clamps and 1000mm long SS bellows are included for connecting to vacuum pump

  • Built-in 0.3 Bar pressure release valve to protect over-pressure accident.

Pressure Sensor

  • Anti-Corrosive Capacitance Diaphragm Gauge (Gas Independent), measurement range up to 3.8x10E-5 torr

  • One 24V,1A DC power adapter is included and ready to use. Input voltage for the adapter is 110~240V Single Phase.

Flow Meter

  • Compact Direct Read Flow Meter, 100-1000 cc/min. with 1/4NPT

  • Accuracy: 4%

  • Optional:  Precision MFC is available upon request at the extra cost

Water Chiller

  • Temperature range: 5 - 30

  • Water Flow Rate: 58 L/m

  • Note: It is recommended to use specific coolant to get the best performance.

Vacuum Pump

  • One 156 L/m Rotary Vane Vacuum Pump is included

  • Rate: 156 L/min up to 10E-2 torr vacuum.

  • Max. Power Consumption: 0.4KW / 0.37KW

  • For US customer, 110V Vacuum pump will be included

  • If you choose high-speed turbo-pump, vacuum level can reach 10E-5 torr 

Heavy Duty Mobile Cart

  • Structure: Steel Frame Mobile Cart

  • 600mm(L) x 800mm(W) surface for placing Induction Heater & Quartz Tube with Flange

Protective Sheild

  • For Non-UL Certified version, a protective shield made of phenolic sheets will be provided.

  • For UL Certified version, a clear protective shield made of polycarbonate will be provided.

  • The protective shield is to be placed around the quartz tube to contain the shooting glass shards if accidents were to happen.

Warranty

  • One year limited warranty with lifetime support

  • Consumable parts such as processing tube, thermocouple, refractory liners, o-rings and heating coil are not covered by the warranty

Net Weight

350 lbs


Disclaimer: The product introduction content (including product images, product descriptions, technical parameters, etc.) of this site is for reference only. As the update may not be timely, there will be some differences between the content and the actual situation. Please contact our sales staff to confirm. The information provided on this site does not constitute any offer or promise, and the company will periodically improve and modify the website information, without prior notice, please understand.

Contact Us
  • E-mail: cysi@cysi.wang
  • Tel: +86 371 5519 9322
  • Fax: +86 371 8603 6875
  • Add: No. 820, 8th Floor, 1st Unit, 9th Block, Cuizhu Street, High-Tech Zone, Zhengzhou, Henan, China




Follow Us

Copyright © Zhengzhou CY Scientific Instrument Co., Ltd. All Rights Reserved    Update cookies preferences

| Sitemap |       Technical Support: