15KW Induction Heating System with 8.5" Quartz Tube and Temperature-Controller up to 2000℃

Induction Heater

• Working Voltage: 220V AC, 50/ 60Hz, Three Phases ( 380VAC, 3phase available upon request )

• Working Current: 5~52 Amps (60A breaker required)

• Max. Input Power: 15 KW 

• Output Frequency: 30 - 80 kHz 

• Duty Cycle: 80%

• Induction Coil: 220mm(ID) x 65mm(H) 

• Air Cooling: Rear Fan

• Protection: Automatic water pressure, over-temperature, and overpower protection

• Refractory Assembling: Complete refractory assembling made of alumina, including bottom crucible support, crucible holder, and cover

Temp. Controller & Thermocouple

• Precision digital temperature controller with Automatic PID tuning

• 30 segments programmable for controlling heating and cooling rate as well as dwell time.

• Overheating & thermocouple failure protection.

• +/- 3℃temperature accuracy. 

• Thermocouple: C type  ( 1/4"x10"L )  

• Continuous Working Temp. Range: 1000℃~1900℃

• Max. Working Temperature: 2000℃ (for less than an hour)

• Max. Heating Rate: 

•  4℃/second (1000℃-1200℃)

• 3℃/second (1200℃~1500℃)

•  1℃~2℃/second (1500℃~2000℃)

Graphite Crucible & Refractory liners

• High Purity Graphite Crucible: 114 mm O.D x 100 mm ID x 142mm Height is included for induction heating. Max. Loading Capacity: Up to 1/2 of the total volume of the graphite crucible.

• Max. melting capability: 4 kg for Iron (tested)

• Three-layer special design refractory liner can withstand temperature up to 2200C.

• Note: Graphite crucible is consumable, please order spare at CYKY

Sealing Flanges
 & Quartz Chamber

• Two-end Open Quartz Tube is included with dimensions of 216 mm(OD) x 208 mm(ID) x 500mm(L),

• Top Flange: Stainless steel hinged type flange with 1/4'' thermocouple feedthrough, needle valve, and the barb fitting.

• Bottom Flange: Stainless steel flange with a needle valve and KF-25 vacuum port. 

• KF25 right angle valve& clamps and 1000mm long SS bellows are included for connecting to vacuum pump

Pressure Sensor

• Anti-Corrosive Capacitance Diaphragm Gauge (Gas Independent), measurement range up to 3.8x10E-5 torr

• One 24V,1A DC power adapter is included and ready to use. Input voltage for the adapter is 110~240V Single Phase.

Flow Meter

• Compact Direct Read Flow Meter, 100-1000 cc/min. with 1/4NPT

• Accuracy: 4%

• Optional: Precision MFC is available upon request at the extra cost

Water Chiller

• Temperature range: 5 - 30°C

• Water Flow Rate: 58 L/m

• Note: It is recommended to use specific coolant to get the best performance.

Vacuum Pump

• One 156 L/m Rotary Vane Vacuum Pump is included

• Rate: 156 L/min up to 10e-2 torr vacuum.

• Max. Power Consumption: 0.4KW / 0.37KW

• If you choose high-speed turbo-pump, vacuum level can reach 10E-5 torr 

Heavy Duty Mobile Cart

• Structure: Steel Frame Mobile Cart

• 600mm(L) x 800mm(W) surface for placing Induction Heater & Quartz Tube with Flange

Protective Sheild

• For Non-UL Certified version, a protective shield made of phenolic sheets will be provided.

• For UL Certified version, a clear protective shield made of polycarbonate will be provided.

• The protective shield is to be placed around the quartz tube to contain the shooting glass shards if accidents were to happen

Warranty

• One year limited warranty with lifetime support

• Consumable parts such as processing tube, thermocouple, refractory liners, o-rings and heating coil are not covered by the warranty

Net Weight

350 lbs