10kg medium frequency vacuum induction melting furnace is a vacuum induction furnace, using induction heating, equipment melting temperature can reach 1600℃. Stainless steel water-cooled chamber, equipped with quartz observation window to observe sample melting
10kg medium frequency vacuum induction melting furnace is a vacuum induction furnace, using induction heating, equipment melting temperature can reach 1600℃. Stainless steel water-cooled chamber, equipped with quartz observation window to observe sample melting, suitable for metal sample melting and heat treatment, phase diagram research. Equipment adopts medium frequency induction power supply, the maximum support custom 60KW high frequency induction power supply. The equipment is equipped with high vacuum molecular pump set, which can effectively improve the vacuum degree of the base, and then improve the melting quality. The equipment is also equipped with lifting platform and turning handle, which is convenient for the operator to carryout the casting and sampling operation after melting.
The equipment has comprehensive functions, fast melting, easy to use, energy saving and environmental protection, and is very suitable for laboratory metal sample research. It is widely used in colleges and universities and scientific research units to melt and prepare metal materials (such as stainless steel, nickel base alloy, copper, alloy steel, nickel cobalt alloy, rare earth neodymium iron, etc.) under vacuum or protective atmosphere. It can also be used for vacuum refining and precision casting of alloy steel Main technical parameters
Medium frequency induction melting furnace CY-IM700-60KW | ||
Inductio n power supply | Frequency | 5-30kHz (if) |
Power | 60KW | |
Vacuum chamber | Chamber material | #304 stainless steel |
Cavity size | Φ700mm x 600mm | |
Cooling system | Includes water-cooled electrode, water-coo led chamber, water-cooled mold There is a water-cooled interlayer in the cav ity, and the surface temperature of the insu lation cavity is lower than 35℃ when the eq uipment is working | |
Viewing Window | Main viewing window diameter φ120mm | |
Lifting platform | 0 ~ 40mm lifting range | |
Accessories with | Infrared thermometer vacuum funnel | |
Water cooling interf ace | Φ10mm quick connector plug | |
Vacuum connector | CF160 | |
Exhaust port | KF25 | |
Molecular pump | CY-1200 | |
Front pump | Rotary vane pump VRD-16 | |
Ultimate vacuum | 1.0 e-3 Pa | |
Pumping speed | Molecular pump: 1200L/S Rotary vane pump: 4.4L/S Comprehensive pumping performance: vacuum degree up to 1.0E-3Pa in 20 minutes | |
Vacuum measureme nt | Composite vacuum gauge | |
Power Supply | Ac 380V 50/60Hz | |
Pouring system | The equipment has a pouring device, which can pour the melted s ample into the prepared ingot mold and pour it into the desired s hape of the sample Size of pouring abrasive: I.D.100 mm x 160mmH | |
Crucible | Graphite crucible sle eve | Max support size I.D.100 mm x 160mmH; |
Inductio n heating system
| 60KW induction power supply with time controller and power con Troller Water cooler: 58L/min. Induction coil: inner diameter 150mm; Height: 150mm | |
Temperature control system | Temperature control system with overtemperature protection. Sel ect infrared sensor, the test temperature can reach 1600℃. | |
Feed Can | Included, the feeding method can be manual or automatic | |
Other | Supply voltage | Three-phase 380V |
Total power | 60KW | |
Total dimensions | 1550mm x 700mm x 1400mm | |
Total weight | 900kg |
Copyright © Zhengzhou CY Scientific Instrument Co., Ltd. All Rights Reserved Update cookies preferences
| Sitemap | Technical Support: