Double side R2R coating equipment for battery electrodes is a vertical roll to roll coater designed for preparating double side electrode sheet for both Li-Ion and NiMH batteryies.It is excelent for making double coating for porous substrate,and has small footprint to save lab space. The coater also can be used for make double coating for othermaterial from slurry.
Double side R2R coating equipment is applied to the coating of materials such as nickel batteries and super capacitors. The equipment adopts dip-coating slurry, scraper metering, and continuous double-sided coating of the substrate at one time.
Working Voltage | 208 - 240 V AC, 50/60Hz, Single Phase |
Max. Power Consumption | 3 KW ( 20A Air breaker required ) |
Coating Method | Coating Thickness Precison: +/- 0.003mm |
Max. Coating Width | 250mm |
Thickness adjustable range | 0- 5mm |
Coating thickness (after drying) | 30 - 200um (for most kinds of battery electrode coating material) |
Thickness Precision | ± 3 µm |
Coating Speed | 0-750 mm / minute |
Max. Drying Temperature | 150°C |
Temperature Accuracy | ±1°C |
Heating Zone Length | 710mm (28") |
Reeling/Unreeling Shaft | 75mm (ID) |
Max. Reeling/Unreeling Diameter | 250mm (OD) |
Max. Coating Length | 1)Depending on the coating and substrate thickness. 2)Typically, 10um thick foil with 100um coating can get 600 meters of electrode length coated per run. |
Exhaust Port Size | 127mm O.D |
Compressed Air | 0.5-0.8 MPa (Air compressor not included. ) |
Product Dimensions | L1100mm×W1200mm×H1800mm |
Net Weight | 1000 kg (2200 lbs) |
Warranty | 1)One Year limited warranty with lifetime support. 2)Rusting and damage due to improper storage condition or maintenance are not covered by warranty. |
Copyright © Zhengzhou CY Scientific Instrument Co., Ltd. All Rights Reserved Update cookies preferences
| Sitemap | Technical Support: