6 position SILAR dip coater has been designed to automate the entire process to avoid operator fatigue and errors associated with it. In manual SILAR process, the operator has to perform hundreds of repetitive dipping into the solution and water. It is very difficult to control dip duration and number of dips in a manual process which can last hours. In the automated unit, the operator needs just to clamp the substrate into the holder and program the controller with required dip cycles and duration.
This coating system uses a liquid phase film preparation process - SILAR (continuous ion adsorption reaction) method to deposit a film on a glass substrate. This technique involves multiple dipping of the substrate in a given solution and deionized water, both temperatures being varied as the case may be.
6 position SILAR dip coater specification:
Power Input | 208-240VAC, 50/ 60Hz 600 W max (with heater) |
Actuator | Stepper motor |
Drive Mechanism | Lead screw |
Dip Duration | 0 - 99 seconds / minutes / hours |
Speed Control | Drawing speed adjustable from a digital panel from 2 microns/sec to 9000 micron/sec ( Max.) |
Number of Dips | 1 - 999 |
Hot Plate Temperature | Ambient to 350°C for each hot plate ( 6 in total ) |
Beaker | Reommended 100mL beaker with 50mm OD Beaker is not included in the package |
Stirrer Speed | 1 - 200 rpm |
Thermocouple | 6 K-type thermocouple built-in |
Stroke length Max. | 75mm |
Control Unit | Speed control via LED display with 5 programs memory Six Temperature controller to control 6 hot plates independently with +/-1°C accuracy up to 350°C |
Warranty | One year limited with lifetime support |
Net Weight | 80 lbs |
Shipping Weight & Dimension | 140 lbs, 40"×30"×31" |
