4 position SILAR specimen programmable dip coater with magnetic stirrer

4 position SILAR specimen programmable dip coater with magnetic stirrer

4 position SILAR specimen programmable dip coater features an air-tight chamber with a front observation window. The unit provides inlet and outlet valves for inert gas purging. This helps to protect samples from moisture or oxygen exposure at the end of the coating process.

Inquire Now Next Product

4 position SILAR specimen programmable dip coater provides four separate platforms to place coating solutions each with magnetic stirrer. User can also control the speed of the magnetic stirrer for each beaker independently by using the knobs on the front panel of the controller.

In this technique, the thin film is deposited on glass substrate following a chemical technique called successive ion layer adsorption and reaction (SILAR). The technique involves multiple dipping of the substrate in a given solution and deionized water, the temperature of both can vary from case to case.

4 position SILAR specimen programmable dip coater with magnetic stirrer specifications:

Power Input	208-240VAC, 50/ 60Hz
Air Tight Chamber	· Provision of inlet and outlet valves for gas purging · Chamber size: 640L×475W×575H mm
Actuator	Stepper motor
Drive Mechanism	Lead screw
Dip Duration	0 - 99 seconds / minutes / hours
Speed Control	Drawing speed adjustable from a digital panel from 2 microns/sec to 9000 micron/sec ( Max.)
Number of Dips	1 - 999
Stirrer Speed	· 0 - 999 rpm · Independent speed control over 4 working positions
Stroke length Max.	100 mm
Control Unit	Speed and mode control via LED display
Warranty	One year limited with lifetime support
Net Weight	130kg
Shipping Weight & Dimension	300 lbs, 40"Lx40"Wx40"H